Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

upvc window repair windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll have to open the window to get to the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close your window and do a test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease, it may be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to offer advice.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again due to wear and tear can become misaligned, this can cause an opening to appear where the sash meets the frame. This can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it might be necessary to have them realigned or replaced. The interlock may also become disaligned. This happens on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace these.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another, and Upvc Window Repair most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be positioned on the top of your windowsill. They will keep your home warm by blocking out cold air.

The windows made of Upvc window repair can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional immediately.