Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap between the door and the window is large, you might need to consider security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and window repair doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a number of problems that include sagging. A sagging uPVC window could cause issues with light, draughts, and even security. It's crucial to act immediately if you notice your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles can also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the Window repair and then perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, Window repair you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repair near me repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. Changing a window hinge is an easy procedure, but it is easier with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to provide suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges can also be disaligned as a result of wear, causing gaps where the sash meets frame. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to have them aligned or replaced. Second, the interlock can be misaligned. This is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace them.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will provide excellent insulation and security for your home. However, it is important to recognise that all windows have a lifespan and there may come the point when it's more economical to replace them than fix them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.