Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. However when windows with double panes are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, you will need to find some plastic spacers that will assist the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the door and the window is substantial, you may want to use an alarm system that has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows so you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism wearing out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close the window doctor and upvc repair then perform a test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may require removal before a new layer is applied. When it comes to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with a breeze It could be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to replace a hinge on a window however it is easier if someone else helps you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. First, the hinges due to wear and tear can become misaligned, this can cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to have them aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge side and could require to be cleaned. In some cases it is possible to replace the hinges.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease draughts.

Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. If you encounter any issues with your upvc window you should consult an expert immediately.