Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and Double Glazed Window Repairs easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. However, if you have Double Glazed Window Repairs-pane windows that are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the window panes yourself it is important to wear the proper safety gear, Double glazed window repairs including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is large, you might think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need close your window and do an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any DIY expert. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze, it may be hinges at fault. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is essentially a very simple process, but it's easier to do with someone else to assist in holding the frame up.

Make sure that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges due to wear and tear can become misaligned, this causes an opening to appear where the sash joins the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it is cheaper to replace them than to repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.