Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your Window Repairs near Me is damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. If windows with double glazed window repairs panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you may want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you can't reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform a test fitting. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be applied. When it is time to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and reduce its energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges at fault. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process, but it's easier when you have a person to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer assistance.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges, also due to wear and tear can become misaligned, this will cause gaps to develop where the sash meets the frame. If they're beyond repair, Window Repairs Near Me it may be necessary to get them re-aligned. The interlock may also become misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and they may reach a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional immediately.