Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is essential to clean and oil upvc window repairs windows and doors on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to remove the existing panes and install new ones. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close your window and do an initial test to ensure that it fits. The corners of the sash must align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be put on. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to change a window hinge, but it's simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by inadequate installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to give assistance.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges, also due to wear and tear may become displaced, which will cause gaps to develop where the sash joins the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to get them aligned or replaced. Second, the interlock can be misaligned. It is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace these.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as you can.