UPVC Window Handle Replacement

It's easy to replace a broken window handle with the proper tools. It is important to know your handle's type and spindle length before buying the replacement.

Older uPVC windows use handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. They can be left- or right-handed, and must be matched when replacing.

What type of lock or handle do I have?

There are many window locks and handles made from upvc each with its own advantages and purposes. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism works as intended. With time and regular use, window handles made of upvc can become damaged or worn out, rendering them less secure and effective. In some instances, they could even fall off completely. It is important to repair your window handles made of upvc when you begin to notice them falling off. This will help prevent potential break-ins and protect your home from burglary.

It's a simple job that anyone can complete. You will need a few tools, but with the appropriate knowledge, it's an easy task that will take only a couple of minutes. You will need to be aware of the type of handle or lock that you have on your window. This will allow you to choose the right replacement.

Inline Espagnolette Handles

These are the most commonly used type of upvc handle and are usually placed on the outside of your window. They are flat in design and feature a latch that connects to the locking mechanism on the frame of the window when it is turned. Inline upvc handles have a spindle that runs through the middle of the handle into the window frame in order to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles have one screw that holds the handle to the frame and are not as secure as other types of window handles.

Tilt and Turn Handles

In contrast to other handles made of upvc, tilt and UPVC Window Handle Replacement turn handles can be rotated to open the window and tilted inwards to allow ventilation. Generally, they have a 7mm spindle at the back of the handle. They are available in left and right handed versions.

It is important to measure the spindle size when buying new upvc handles. There are a few that are the exact same size. Drop something into the middle of the hole to measure the length. This is the maximum size of spindle that will fit into your windows.

What is the spindle?

uPVC window handles work in a similar manner like doors. By turning the handle, you will be able to operate a latch within the frame. The window is then opened and closed. However, sometimes these handles can become damaged, particularly if they are regularly used or exposed to extreme weather conditions. You may have to replace the handles on your uPVC window if they are not operating correctly.

There are a variety of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. It is crucial to know the type of handle you have installed on your uPVC windows to ensure that you replace it with the right one.

You can determine the type of uPVC handle you have by taking a look at the base of your handle. A snap-in cover should be over the screw that holds the base of the handle in position. Remove this and then you should be able see the second holding screw on the opposite side of the base of the handle. After both screws have been removed, you should be able to pull the handle away from the uPVC window.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take careful note of the length of the spindle since you'll need to ensure that you purchase an alternative that is the same length as your original handle and locking mechanism.

The spindle wears down and cannot operate the locking mechanism. This can be due to damage caused by constant use, a loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, it will be necessary to replace window handle the window handle and locking mechanism to restore full functionality to your uPVC windows.

How do I take off the handle that was previously attached?

Window handles can be damaged or destroyed over time. It is essential to fix them as quickly as you can to ensure your safety. It is simple to replace a worn or damaged handle. The task can be completed in under one minute without the need for special tools.

To take off the handle, you first need to remove the screw located at the bottom of the handle. Once the screw has been removed, the handle can be pulled away. Another screw will be situated at the base of the handle. This too can be removed. After both screws are removed the handle can be removed completely from the base section of the window.

After removing the old handle and align the fixing holes of the new handle with the holes that are already in the window frame. There might be a small sticker or caps on the new handle, so take them off them if needed and then screw the handle in its place. Once the handle is in place, it is important to test that it works by turning the handle and making sure that the lock mechanism is activated.

Espag handles feature spindles that protrude out of the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows have a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over the frame's outer or the transom bar cross member inside the window.

Once you have the new handle in place, slide the spindle into the lock inside the window and then tighten it down. Once the handle is securely fixated and secured, replace the snap-in cover and the screw cap (if appropriate). Once the handle is ready to use, open and close the window a few times to ensure it works correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is actually very simple. You'll need a screwdriver and a little bit of patience. The first thing to do is make sure that the handle is in the unlocked position and then remove any screws that are visible. you can replace them with screw caps if needed. After you have removed the handle, you'll need to take note of the length of the spindle that extends from the back. This is important as it will determine what kind of handle to purchase.

Espagnolette handles are the most commonly used type of handle used on uPVC windows. The spindle is inserted into the handle to activate the locking mechanism within the window frame. When the handle is turned, it releases the latch on the window and allows it to open. Over time and through regular use, espagnolette handles may become damaged or impaired which is why it is essential to find replacements.

Cadenza handles are a different kind of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding knife that works with a multiple-point locking mechanism inside the window. They are more secure than espagnolette handles because they are able to open from the inside. You can replace them using the same procedure as you would for espagnolette handles however, make sure that the new handle is angled, not flat.

Once you have determined the right handle for you then you can place the new handle with the existing screw holes and then screw it into place. You should then put the screws back on and make sure the new handle is working correctly. You can perform this by dragging the handle back and forth from the locked position to the unlocked one a few time. If you have any issues, it could be beneficial to speak with a professional to see if they are able to help resolve the problem. They can offer advice on how to resolve the issue in a timely and effective manner.