Double Glazing Locks Repair

If a double-glazed window doesn't close, it creates drafts and allows heat to escape. This also reduces the security of your home and puts you at greater risk of burglary.

Over time, double glazed window hinges handles, seals and handles can become damaged. If this happens, it can affect the performance of your windows and void any warranties you may have.

Faulty Locks

Many people install anti-burglar devices on their main gates and doors however, they overlook that windows are the most frequent targets for burglars. Having faulty locks could cause drafts to enter the home, allowing valuable heat to escape and weaken the security of your home.

If your uPVC windows locks do not work, it is likely that the mechanism of the lock is jammed. This is typically due to a slit in the gearbox component. This can cause the handle not to open, but instead to rotate 360 degrees. This is a common issue with uPVC casement windows, but it can also be seen in tilt and turn windows, and even sliding sash windows.

In this situation it is possible to release the lock by applying pressure on the lever handle. This can be used to unblock the gearbox and then restore the window's opening. If this method does not work, you may have to replace the window lock mechanism completely.

Most modern uPVC windows use espagnolette locks. They are a locking system inside the window that secures the window by utilising mushroom-like locking cams that are built into the frame keeps. The handle turns on the gearbox, which triggers the cams to allow either up or down movement. The spindle of the lock can break which causes the handle to move but the door to open or close.

A faulty transmission can also cause your window to appear locked but it's not. This is usually the case when the rods in the centre (sometimes known as crocodile teeth fixings) within the gearbox have been snapped off. Misty Glaze will supply and replace the rods if this happens.

It is important to not force a stuck or broken lock. This can cause the lock to snap or break, especially with a uPVC window as it expands and expands as it warms and cools. It is best to call a professional locksmith to determine the issue and repair it.

Sticky Doors/Window

It is annoying to have doors and windows that stick however, they could also be indicative of more serious structural issues. If you're having difficulty to open or close a window or door it is crucial to seek help from a professional as soon as possible. These issues can be a result of many things such as foundation settlement and inadequate support for crawl spaces.

Doors and windows often are stuck due to humidity or a problem with the frame itself. When exposed to moisture, wood frames may begin to warp. Even if your hardware appears good, this can make it difficult to open and close your frames. The wood expands as it expands and is pushed up against the hinges, creating friction.

If your door or window is sagging in summer, try rubbing it with bar soap to decrease the friction. It will shrink and may temporarily solve the problem. This procedure may have to be repeated frequently during times of high moisture.

A more permanent solution involves making the door or window repair near me frame to create a smooth finish. You can do this by hand or with an electric tool. A professional can also stain, sand and paint your window or door frame to make it look like new.

If the sanding and soap don't help, it's likely that your issue is caused by foundation settlement or a damaged crawl space. Look for cracks in the area. It's time to contact an expert in foundation if you see any of these signs. Foundation damage can lead to uneven floors, misaligned walls and doors and windows that are stuck. It's important to address these issues as early as possible to avoid more costly and dangerous repairs in the future. These issues can get worse until your home is unstable and structurally unsound if not addressed. Contact the Southeast's most reputable foundation repair experts to set up an inspection today!

Cracking/Blowing Issues

Cracks can appear when double glazing repairs glazing begins to break down. This can be a snazzy sight and also let all the heat from your home to escape. It also poses a safety threat for your family members as the sharp glass pieces could cause injury if they break. It is best to fix double-glazing windows that have a crack prior to them get any worse. This can increase the cost of replacement.

Window seals are crucial to keep air between the window panes and also to stop drafts from entering your home. Over time, the seals will shrink or eventually be destroyed due to changes in weather. If unchecked it can cause moisture in the home, condensation and draughts.

This issue is usually resolved by an expert. They will be able to replace the window seal and get your windows back to their original state. They can also suggest options to reduce the chance of future stress cracks, for example trickle ventilation for better air circulation.

You could also try lubricating the hinges and handles on your windows and doors. This will enable them move more easily and let the lock perform as it was intended. Rub some lubricating oil on a lint-free cloth and then rub them into hinges and handle mechanism as well as in places where they pass through frames (for example for sash window). You can also remove the handles and clean them in warm soapy water to wash away any dirt or grit.

If your uPVC windows and doors aren't working in the way they should, it's crucial to contact an expert to fix them. They can identify the problem quickly, and repair it in a brief time. It's much less expensive and more secure than trying to do it yourself and potentially damaging the mechanisms. It will also give you peace of mind knowing that your home is secure and safe.