Window Repairs

Window repairs can save homeowners money and keep their homes warm. Window replacements may be required in the event of serious damage, such as broken glass or a window frame that has been smashed.

But many other issues can be addressed to extend the life of your windows. Some common issues include:

Cracked or broken panes

Cracked windows can be caused by a lawnmowers who throws rocks in the wrong direction or a tree branch being blown by strong winds. This is not only visually terrible, but it could result in more energy costs because the broken pieces allow cold air into your house. It's relatively easy to repair windows that have broken panes.

Start by carefully removing the glass with gloves and safety glasses. You may have to use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof to the frame's edges. This prevents water from entering through the crack, which can cause further damage to the frame and the glass.

A serious crack in double-paned glass may compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is severe enough to cause damage to the integrity of the glass, or in the case of an inner pane completely missing, it's time to call in an expert.

Cracks in the glass caused by thermal stress may occur when there's an extreme temperature difference inside and outside your home. The glass is then able to expand and contract. If the cracks are on two sides of a glass, it is recommended to replace it instead of attempt to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready to be replaced. It can also keep out bugs and cold wind. You can also cut an amount of nylon stocking big enough to completely cover the crack, and then attach it using duct tape. This is not an indefinite solution, but it's a good way to keep insects out and cold air away from your home. If your windows are old and you're starting to notice cracks in the glass, it's a good idea to check with the local window repair company regarding whether replacing the entire window could be the best solution for you.

Rotten Wood

Wood rot is a common problem with windows. It can damage a home's appearance and create a safety hazard. It is, however, possible to fix rotted wood. You will first need to determine the root of the wood rot. Check for roof leaks and other places where water can enter the wood.

The next step is to get rid of any rotten areas of the window frame. This can be done using a rasp, chisel or claw hammer. Once the rotten areas have been eliminated it is time to replace them with fresh wood. It is recommended to make use of pre-treated wood for this task as it is more resistant to rot. If you are unable to replace the timber that has rotted then you can use wood hardener and filler to repair the damaged area. The majority of hardware stores sell this kind of product. To achieve the best results, make sure you follow the instructions on the product label.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant to the wood. Sikkens, for example is a great one to use.

You can also apply an epoxy filler with two parts to protect the wood from further damage. It is easy to apply and provides an excellent finish. It is essential to follow the directions on the label. After the epoxy filler dries you can sand the wood's surface. It is best to begin with a rough layer of sandpaper and then move to a smoother grade.

The last thing you would like to do is make the rotted area even worse by expose it to more water. It is therefore a good idea to cover the repaired area with an oil-based primer that will protect it from moisture. Then, you can reapply the waterproof wood sealant.

The website won't work

There are a variety of reasons windows don't open. Wood frames can warp in rainy weather, or the house may have settled or someone might have closed it for security reasons. With a little patience and the right tools you can unlock most stuck windows.

One of the most frequent reasons for windows that won't open is accumulated debris or gunk on its moving parts. Dirt and grime build up on the sliding tracks, hinges, and locks over time, notes Acme Glass. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Spray grease on these areas will help prevent oxidation, and ensure that your windows are operating properly.

Stuck windows can be caused by a loosening or breakage of the pulleys used to lift and lower the window. The components may lose tension and cause obstruction if they are located higher than two floors above the ground.

If you're having trouble opening a window Try using a pry bar to gently force the window open a little at each time. Place a block of wood on the frame to give the pry bar more leverage. Also, be careful not to damage the window or wood. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood and Window Repairs make it easier to move.

A faulty spring can also be the reason for windows that aren't able to lift or lower. You will need to consult the owner's manual for additional information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they still cannot open, it's probably time to replace windows. Homespire Windows & Doors provides windows that are energy efficient. Don't let your windows slide from functional to inoperable since windows that aren't properly shut could make your home vulnerable to burglary and water damage. Contact us for more information about our windows replacement services and products today!