Choosing uPVC Replacement Window Handles

Most customers agree that the replacement handles made of upvc are easy to install and feel great. It is important to be aware that the handle you pick for your window must be suitable for the window.

The primary factor is the step height that is the distance from the nose of the handle to the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

You can purchase a variety of replacement handles made of upvc. They come in many different colours and styles so there is sure to be something that will fit your windows. It's easy to make an impulse purchase especially when the handle is damaged. Therefore, it is best to do some research before buying the replacement. The first thing to think about is the kind of upvc handle do you currently have and what the difference between types is. The table below shows the most popular handles to help you identify the one that is suitable for your windows made of upvc.

Most double-glazed windows today have handles that are epag. They are typically attached to the frame using two screws that are screwed in from both sides.

The spindle bar at the back can be different in size, and will determine if they are left-handed or right-handed. This is the reason it's crucial to measure the current handle to ensure that you're ordering the correct replacement double glazed windows.

The arm is secured to the frame by two bolts, just like the Espag handle. However, the handle has a low projection so that it doesn't damage your blinds. This is an ideal choice when you have blinds on your upvc windows and want to ensure that the handle will blend with them.

Cockspur handles resemble Espag handles, but they have a nose which closes over a wedge which rests on the frame of the window. This kind of handle is commonly used on older Upvc windows as well as some wooden windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing the top of the window. This allows you to open the window from inside and clean it from outside, without having to climb a ladder or step across the garden fence. They are also an excellent option for those with limited mobility. They can be a great way to improve security and accessibility in the home.

Hints and tips

There are a number of different kinds of uPVC window handles, and a lot of people will find themselves replacing them at some point. It is important to know a few tips and tricks that will aid in the process.

Examine the type of handle that is in your home. Depending on what the handle is attached to and which locking mechanism it uses it might be necessary to change the entire handle and lock. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll have to replace them, along with the handle.

Fortunately, the majority of uPVC handles conform to industry standards and are very similar. This makes replacing them an simple process. The first step is to remove the screws from the handles, usually pozi-drive screws. Once the screws are removed you will be able to remove the handle.

If you've got the handle broken from the handle, it's a good idea to make an inventory of how much of the spindle protrudes from the base of the handle. This will help you measure the spindle length for uPVC Replacement Window Handles an alternative handle. To do this, take a measurement of the square peg sticking out from the top of the handle, and use this as a guide.

This is especially important for inline uPVC handles for windows, since they are always straight and only open to the left or right. They aren't able to function in the middle. It's a good idea if you are not sure what type of handle you have at your home to borrow a handle and check out how it functions.

You can also determine the hands of a uPVC window by watching how the handle rotates when it is used. Handed handles can turn either clockwise or anti-clockwise. If you're not sure it's possible to ask someone else to open the window using the handle, and figure out how it operates in that way.

Find the spindle's measurement.

It can be difficult to pick the right replacement handle for your window as there aren't all handles that come in the same size. It is essential to accurately measure the spindle when fitting the new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles and they operate in different ways therefore it is crucial that you know which kind of handle you have and the type of locking system.

The spindle of the espag handle extends out from the handle's rear, and is connected to the lock gearbox within the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox, allowing you to open the window. They are installed on uPVC windows with casement. They can be locked with keys to provide additional security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They have an "nose", which closes over a wedge-shaped striker block. They are also simple and can be locked using keys. It is more difficult to replace these handles since they are not as popular as the handles made of espagnolette.

If you have a tilt and turn uPVC and you require a new handle that has an alternative locking system. It will be able to open the window, but also turn it around to open it fully. It is essential to make sure that the handle you pick has a spindle size of at least 55mm or it will not be able to get into the frame of the window.

You can follow the same procedure to remove and replace this kind of uPVC handle, but you'll need to be careful when unscrewing the old one. You may have to open the window a bit larger than normal to ensure you get to both screws fixing it to the frame. After you have installed your new uPVC handle and ensured that it is in the proper position, you are able to tighten the screws and test the lock to confirm that it is working correctly.

Fit the new handle

If you have the proper handle replacement, it's going to simply be screwed into place. This will require a screwdriver, but might be easier using an electric one. When screwing the screws in, it is crucial not to over tighten the screws because this could cause the handle to warp or crack.

Another important step to take when fitting the new handle is to install the spindle. The spindle is the part that runs through the handle to operate the locking mechanism inside the window. It is important that the part fits correctly because this will permit the window to be opened and shut securely.

There are a variety of different kinds of uPVC window handles. These include:

Espagnolette Handles - these are handles that are inline and can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is useful for windows in difficult-to-access locations.

Tilt and Turn Handles - These are used on tilt and turn windows for operating the opening and closing mechanisms.

They are the most popular and the majority of uPVC windows have them in the first place. They are often called 'Bay Windows in the UK.

If your uPVC window handle is broken, it can be a major hassle. But, there isn't a need to replace the entire uPVC window because of a damaged handle. There are a few basic steps you can take to fix or replace a damaged uPVC handle.

Fixing your broken window handle swiftly by identifying the type and measuring the spindle. When working with tools and windows, it is important to put safety first. However it is a easy task. It could make the difference between having a safe and secure home, or an insecure, easily opened window! Bridgewater Glass is the place to visit if you have any questions or want to speak with an expert about replacing your window handle. Our team is experienced and knowledgeable to assist you with any problem.