Why You Need Window Lock Repair

The locking mechanism of your windows is a crucial element to reduce air infiltration and to secure your home. If you're experiencing issues with the window lock, it is important to get this repaired right away.

It's easy to fix your window locks!

Check the alignment of the frame and window.

Nearly every homeowner has windows in their homes and, although there are various kinds that homeowners could choose from however, all will eventually require repair to the window lock. Windows are subject to the same wear and tear as other parts of your home, and may be damaged due to natural causes.

It is particularly applicable to uPVC Windows, which are increasingly popular in the UK. However even the best-built windows can develop a variety issues over time. If this happens, you may notice that the lock isn't opening or closing properly.

It is essential that a locksmith professional arrives at your home to look over the window lock and identify the issue. The problem will be identified by a professional locksmith after an inspection of the window lock mechanism and the handles. If they can't fix the window lock mechanism and recommend replacing it completely.

In many cases, the main cause of this issue is a lack of proper maintenance on the part of the homeowner. When a uPVC window isn't cleaned regularly or lubricated the sash channel will begin to shift in alignment with the frame. This will stop your window from closing correctly since it doesn't be able to stand up to the force of the frame.

Luckily, there are many simple solutions to this problem. If a window isn't closing correctly, you can realign the sash channel by lifting and pushing the handle as you try to close it.

In the case of a uPVC window that isn't locking correctly, you can try to realign the lock by loosening the screws on the sides of the frame and then moving it slightly to one side or another. If this doesn't work, you may need to replace or remount the locks.

Clean the hardware.

Hardware plays a big part in the way your windows appear and function. It is also the point of contact that homeowners use to open and close their windows.

This can be achieved by doing regular maintenance and cleaning every year. This will eliminate any dirt or debris which could affect the way the window opens and shuts. It's recommended that the hinges, operator and locks be inspected to ensure that they're securely tightened. This is particularly important if you live in an area that experiences harsh weather conditions or frequent wind that can loosen screws that attach hinges to frames and sash.

To clean the hardware using a brush or rag to clean any dirt. You can also soak the hardware in lukewarm but be sure to avoid damaging the brass plating. Based on the condition of your hardware you may require bristles made of brass or a chemical rust remover to get rid of any rust build-up. Wear rubber gloves when you are using chemicals. Also, wash the metal surface after each step.

After cleaning your hardware, you can lubricate it. This will allow it to move easily. This is especially important for lock latches and Upvc Windows hinges, which can become rigid or break if they're not properly lubricated. A non-detergent silicone spray is the best method to lubricate the hardware. Avoid oil-based lubricants as they can cause the hardware to be corroded.

If you have older hardware which has developed a patina and doesn't fit with the rest of your windows, you can also apply a thin layer of clear varnish to it to shield it. If your old lock's spindles were not long enough they could be cut to match up with the new spindle on the handle. To do this, simply take the old handle and measure its spindle. You can then order a new lock that has the correct spindle size and have it put in your window.

Lubricate the mechanism.

When the window lock isn't functioning as it should, it can be frustrating. It's important to lubricate the lock to ensure it operates smoothly and keeps the seal intact. This will prevent moisture from getting into the locking mechanism and causing problems later on.

You can purchase a top quality lubricant from most hardware stores, or on the internet. A silicone-based spray works best for windows, locks and hinges. Use a damp cloth to apply the spray onto tracks and doors as well as seals and seals to keep them lubricated.

It is recommended that you lubricate windows, patio doors, and hinges once a year. This will ensure that your parts move smoothly, and reduce wear and tear over time. It is also possible to use dry lubricant made from Teflon, which is preferred by many locksmiths since it forms a thin layer inside the lock that blocks dirt, dust and chemicals.

If the locking mechanism on the crank casement windows isn't working, you might need to replace it. This process is quite simple however it requires the removal of the frame and glass from the window frame to access the lock mechanism. Then, you'll need to take out the screws holding the handle from before and then screw the new latch into place. The new lock will usually have a longer spindle, and you'll need to cut the top of the spindle that's currently in use to be the same length as the new one.

It is recommended to complete this step prior to installing a new window as you'll need to open the window and clean the area around the lock. You can then grease the window and test it, ensuring that it closes and opens smoothly. If you're not comfortable with this task, you should employ a professional with experience to help you. It's better to pay a bit more now than to deal with a damaged window and costly repairs later. A professional will have the tools needed to do the job properly.

Replace the lock.

If the latch lock on your window isn't functioning properly, you might have to replace it. The latch locks can break due to a variety of reasons: they may be rusted or in need of an oiling to work properly, or they might be damaged by the force of a blow. In addition, the latch may have deteriorated or stopped working completely due to aging.

Tasker will remove old handle from mounting screws and replace the latch. The Tasker will also take off any plastic caps attached to the handle. Then the new window lock is screwed into the slot. The old lock will have to be cut to match the new one in the event that the spindle is different.

In casement windows the locking mechanism is made up of a bar that slides between up and down. When the handle is pulled down, it pushes the bar up and secures the window. The lever for locking is fitted with clips that slide over the round knob on the bar. To fix a casement lock you must open the window as wide as you can. Then, push down on the locking bar until the clip is engaged.

The Tasker will inspect the locking mechanism to determine if it requires a quick lubrication or cleaning or if the whole mechanism needs to be replaced. If the lock is dirty or worn out or rusted, the Tasker will clean it, upvc windows apply lubricant, and then re-affix the handle. In other situations, the Tasker will need to remove the entire mechanism from the window frame to identify its type and then buy and install the proper replacement.

Window locks are a crucial part of a security system for your home. It isn't easy to keep a house warm and secure if they aren't working properly. Most of these problems are easily resolved with a few simple fixes. To ensure that your window locks continue to work properly, it is recommended to have them repaired or replaced by professionals.