Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you plan to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. In time, they could develop a number of problems, including sagging. A sagging uPVC window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you'll have to open the window to access the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to offer assistance.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the risk of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges can also be misaligned due to wear, creating a gap between the frame and sash. They can be repaired by giving them good cleaning, Upvc Window Repairs but if they are beyond repair it could be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it's possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come a point where it is more efficient to replace them than repair them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as possible.