Choosing uPVC Replacement Window Handles

Almost all customers agree that the upvc replacement window handles are simple to install and feel like high-quality. It's crucial to understand that the handle you select for your window must be suitable for the window.

The step height is the most crucial factor. This is the distance between the handle and the frame, or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a broad selection of replacement window handles made of upvc available for purchase. There are many designs and colors to pick from, so you're bound to find something that is compatible with your windows. It's easy to make an impulse purchase particularly when the handle is damaged. So it's best to check a few things before purchasing an alternative. First, you need to know what type of handles made from upvc you have and what the differences between them. The table below shows the most common handles to help you choose the one that will fit your upvc windows.

Espag handles are the most common and are found on most modern double glazed windows. They are typically attached to the frame using two screws that are screwed into the frame from both sides.

The spindle bar at the back could be of different in size, and will determine if they're left-handed or right-handed. It is essential to know the measurements of the handle you need to ensure you get the right replacement.

The arm is secured to the frame by two bolts, just like the Espag handle. However, the arm has a lower projection, to ensure that it doesn't scratch your blinds. This is a great choice for those who want the handle to blend with your blinds, and you have windows made of upvc.

Cockspur handles are similar to Espag handles but they have a nose which closes over a wedge, which is placed on the frame of the window. This kind of handle can be commonly used on older Upvc windows as well as on some wooden windows.

On casement windows the tilt and turn handles can be operated by either turning the handle or pressing the top of window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. They're also an excellent option for those with limited mobility and improve security and access in the home.

Hints and tips

Many people will have to replace their uPVC window handles at some time. If this occurs, it's a good idea to know a few tips and tricks that will assist in making the task be as smooth as it can.

Examine the type of handle that is located at your residence. Depending on the type of handle and locking mechanism, it might be necessary for you to replace window handle the lock and handle. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll need to replace them, along with the handle.

Thankfully, the majority of uPVC handles are similar and adhere to industry standard sizes, making replacing them a relatively simple process. The first step is to remove the screw covers from the handles, usually pozi-drive screws. After the screws have been removed, you will be able to remove the handle.

When you have the handle broken from the handle, it's a good idea to make a note of how much of the spindle extends from the base of the handle. This will help you determine the length of the spindle for a replacement handle. To do this, determine the length of the square peg sticking out from the top of the handle, and use it as a reference.

This is especially true for inline uPVC handles for windows, since they are always straight and only open left or right. They will not work in the middle. If you're not sure of the kind of handle you have at home, uPVC Replacement Window Handles it might be beneficial to get the handle from your neighbor's house and see the way it works to get an idea.

You can also determine the handedness of a uPVC window by observing how the handle spins when it is in use. Handed handles can turn either clockwise or counter-clockwise. If you're unsure, you can always ask someone else to open the window with the handle, and work out how it operates in this way.

Measure the spindle

The selection of the right replacement handle for your windows could be a bit difficult since not all handles are identical in size. The spindle is the mechanism that locks the window and it is crucial to ensure that when installing the new handle, you measure the length of the spindle accurately to ensure it fits. There are numerous kinds of uPVC handles that operate in different ways. It is important to determine which one you have, and what locking system you have.

Espag handles have a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle, it turns the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have a "nose", which is secured by a wedge-shaped striker block. They are also quite simple and they can be locked with keys. These handles can be a little more difficult to find replacements for as they aren't as well-known as the espagnolette handle.

If you have a tilt-and-turn uPVC and you require a replacement handle with a different locking mechanism. The handle can tilt the window, and allow it to be rotated back and forth in order to fully open it. You should select the handle with an opening of at least 55mm to be able to reach the window frame.

You can follow the same method to take off and replace upvc window handle this kind of uPVC handle, however you must be cautious when you remove the old one. It may be necessary to open the window a bit wider than usual to access both screws that secure it to the frame. After you have installed your new uPVC handles and verified that they are in the right position and tighten the screw covers and test to ensure the lock is working properly.

Install the new handle

Once you have the right handle replacement, it's going to simply screw into the appropriate position. It will require a screwdriver and an electric one might be more convenient. When screwing in place it is crucial not to over tighten the screws as this can cause the handle to warp or crack.

The second step in installing the handle is to install the spindle. It is the part that runs through the handle and is responsible for operating the locking mechanism inside the window. It is crucial that it fits correctly as it will ensure that the window is able to be closed and opened with confidence.

There are a variety of different kinds of uPVC window handles. They include:

Espagnolette Handles are inline handles that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved shape which is ideal for hard-to reach windows.

Tilt and Turn Handles - These are used on tilt and turn windows to control the opening and closing mechanisms.

The majority of uPVC window frames come with these. They are often called 'Bay Windows' in the UK.

It can be a hassle If your uPVC handle breaks. There is no need to change the entire uPVC windows due to a broken window handle. There are a few simple steps you can take to repair or replace a broken uPVC handle.

You can fix your broken window handle fast by identifying the type and determining the spindle. It is essential to be patient and prioritize safety when working with windows and tools, but this is a relatively easy task. It can make all the difference between having a secure and secure home or a vulnerable, easily opened window! Bridgewater Glass is the place to go if you have questions or want to speak with an expert regarding replacing your window handle. Our team is skilled and knowledgeable to assist you with any issues.