Double Glazing Lock Repairs

The best locks for your doors and windows will stop burglars from gaining entry into your home. They aren't likely to break glass or try to squeeze through open windows.

Some owners of double glazing, however, have encountered issues with their window or door lock after the installation. Fortunately, these issues can be fixed without having to pay for new double glazing.

Broken or damaged locks

A locksmith can repair your uPVC window lock or door lock if it is damaged or is not working properly. They can repair the striker plates, hinges and locks on your double-glazed. They can also move the cylinder to fix any misalignment which could be causing your handle not to work properly.

If the key fits in the lock but it won't turn or is difficult to insert the mechanism could be locked up. Grease or dirt can get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant like graphite or Teflon but not oil as oil can attract dirt and cause it to stick to the inside mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should make through the mechanism and the lock should be able to turn with ease.

A malfunctioning lock could be caused by loose screws within the lock mechanism. They may loosen, fall out, or even break completely, preventing the lock from being able to perform as it should. A screwdriver is a tool to tighten the screws however, care must be taken not to over-tighten them because this could cause damage to the internal components.

A broken lock can be dangerous for you and your family, particularly if you have young children. They can open the door without knowing and gain access to your house. If you're worried about the possibility that this might happen, a vetted professional locksmith can assist you to secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and damaged mechanisms on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific needs, which means that in a lot of cases replacement windows and doors are not necessary.

Handles that are damaged or faulty

As part of their overall security package most double-glazed windows feature a multipoint lock. This is a great option for those who are worried about potential burglars trying to gain access to their home. Ask your locksmith about antilift blocks. They can be put in as an addition to the existing locks and handle will ensure that your windows are securely shut.

Handle locks are usually damaged or fail. They are the first component that criminals use to force open your window. The good news is, this is one of the easiest parts to repair.

Modern uPVC and aluminium handles feature a multi-point locking system known as Espagnolette that is designed to withstand forced entry. This security upgrade is often offered as an optional extra on new uPVC window installations. As an upgrade option older style uPVC or aluminium handles that are no longer in use can be upgraded to shoot bolt locking systems.

It is essential to fix handles as quickly as possible after it has been damaged. A damaged handle can stop the window from closing correctly and also allowing drafts to enter. It could also be a vulnerability that opportunistic thieves could exploit and put the belongings of your family and your own at risk.

To repair the broken mechanism, first access the window frame and then remove the broken handle. The gearbox that opens the handle is accessed and the type identified, so that a replacement may be found that matches the profile of the internal window frame mechanisms.

Once the mechanism is replaced, the handle can be re-affixed using the original screws but we would recommend replacing them with larger ones because this will ensure a more secure fit. The final step is to apply a layer of clear sealant to shield the handle from further rust. After that your window will be fully operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are broken or damaged

If your windows don't close properly, you could experience draughts, the weakening of your home's security barrier and an increased chance of damp or water damage. Window hinges that break or become faulty are a common issue and can be fixed easily.

If you have a window made of uPVC that won't open or close it's likely that the hinges are damaged or broken and need to be replaced. While many window companies require you to purchase a new window to fix this simple problem, we're able to replace the faulty hinges and save you money.

Window hinges are often damaged after repeated use, or they could be weakened through rust over time. If you have a broken window hinge, it's important to take precautions to prevent further damage. This includes not causing the window to open or close.

You can find the right parts for your hinge by identifying its model. The most commonly used kinds of window hinges include Maco, Mila, Roto and many other brands. It's best to consult a professional in this case to avoid the mistake of buying parts that are not compatible with your current hardware and cause further damage.

Faulty hinges can be a major issue for your uPVC windows and doors. They can be a major source of noise, and they can also permit water to infiltrate your windows.

Verify that the pin barrels on both sides of the hinge are aligned. If not then tap the headpin using a hammer in order to create a slight bend in the hinge barrel. This will help keep the pin in place. Ask a second person to hold the door while you remove the hinges and hinge screws from both the doorjamb and the door repair. Replace the hinges using those that are of the same size, and attach the screws using glue. Finally put the hinges in place using clamps or weights while the glue sets.

Once you have repaired your hinges, you are able to reinstall the door repair. You can also attach the handle. Replace the screws with wood dowels of the same length as the original screw to ensure that they match.

Broken or Faulty Glass

While uPVC windows do a great job of keeping cold out and the heat in, they can become damaged over time. This can include broken or damaged glass as well as faulty locks. This is a problem that can be costly when left unattended. It can also detract from the appearance of your home and may lead to a loss of insulation, so it's important to repair any damage as soon as you can.

You can repair your cracked glass by yourself if you have the appropriate tools and techniques. Be sure that the area surrounding the glass that has been broken is free of debris to ensure that fragments don't cause injury or cause a trip hazard. Then, you must remove any broken pieces and dispose of them in a safe manner. Apply masking tape over the entire area. This will stop glass shards from sticking to your skin and scattering when you move them. Pre-fitting the glass pane before applying glue is an ideal option when you have a window that has two panes. This will ensure you have enough room to finish your project.

Before applying the glue, clean the surface of the broken frame and glass with a an unclean, dry cloth. Follow the curing and application directions that may differ from product-to-product. Based on the angle of the crack, you may need to clamp the glass during curing. This can be done using lightweight clamps specifically designed to support fragile materials.

Once the adhesive has fully set, handle carefully place the glass into the window frame. Make sure it's flush with the frame edge and that there aren't any gaps between the glass sash and frame. Be careful to avoid flexing the window while it's reinstalled, as this can weaken the seal and lead to water infiltration and condensation.

If you have a glass door that's completely shattered or has larger cracks, consult a professional glazier like O'Brien(r) to organise the replacement. It's crucial to act fast if you have broken glass.