Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or Near Me duct tape to block water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you may think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, near me uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may have to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window harder to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal than the frame. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is essentially a simple process but it can be easier to do with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to provide suggestions.

It is also important to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this causes an opening to appear where the sash meets the frame. If they are beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it is possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window repairs near me window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to simply replace them than to repair them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as possible.