Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need find some plastic spacers that will assist the new pane to fit properly into the window repair near me frame.

If you are going to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts, and even security. It's important to take action immediately if you discover that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to access the frame. After that, using the screwdriver, emergency you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in place.

If you cannot reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment fit. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, emergency and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer can be put on. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal than the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with ease, it may be the hinges that are at the fault. They can be repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like all mechanical parts hinges will wear out over time. It's easy to change the hinges on a window, but it's easier if someone else helps hold the frame.

Check that the uPVC hinges are closed and emergency open in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the possibility of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also be disaligned as a result of wear, creating a gap between the frame and sash. They can be fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also be misaligned, and again it's possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be cheaper to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.