Window Repairs

Window repairs can save homeowners money and help keep their homes comfortable. Window replacement is often required in the event of severe damage like broken glass or a broken window frame.

But many other issues can be addressed to extend the lifespan of your windows. Common problems include:

Cracked or broken panes

If it's an unintentional rock being tossed by your lawnmowers, or a tree branch blown by high winds, damaged windows are not just visually unappealing, but also can result in more expensive electricity bills because the broken pieces allow cold air to enter your home. It's relatively easy to repair windows with damaged panes.

Begin by carefully removing the glass with gloves and safety glasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the frame's wood with a soft cloth or paper towel.

After the area is cleaned and dry, apply a waterproof silicone caulking on the frame's perimeter. This will stop water from entering through the crack, which can cause further damage to both the frame and the glass.

A crack that is severe in double-paned glass may cause gas to leak between the panes, rendering your windows less insulative. If the crack is serious enough to threaten the quality of the glass or the glass has an inner pane that's completely missing, it's the time to call a professional.

Cracks in thermal stress can occur when there's a significant difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If this happens to two parts of a window it's best to replace the glass instead of trying to repair it.

Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It can also keep out cold and bugs. You can cut a piece of nylon stocking or tarp that's sufficient to cover the crack, and glue it in place with duct tape. This isn't a permanent solution however it can be useful in a pinch and keeps insects and cold air out of your home. If you notice cracks appearing on your windows that are older, you should check with your local company to see whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a common problem with windows. It can damage a home's appearance and create a safety risk. It is possible to repair damaged wood. The first step is to ensure that the source of the rot has been addressed. Look for leaks on the roof and other areas where water can enter the wood.

The next step is to remove any rotten areas of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. After the areas that are rotten have been eliminated it is time to replace them with new wood. Pre-treated wood is suggested for this task, since it is resistant to rot. If you are not able to replace the rotted timber, you can use wood hardener and filler to strengthen the damaged area. Many hardware stores will carry this type of product. To get the best results, make sure you follow the instructions on the label.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. This can be done by applying a water-resistant wood sealant. A product such as Sikkens is an excellent option to accomplish this task.

You can also apply a two-part epoxy filler to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, Window repairs it is very important to follow the directions for application on the label. Once the epoxy filler has dried, you are able to sand the wood's surface. It is best to start with a rough layer of sandpaper and then move to a smoother one.

You do not want to expose the damaged part to further moisture. Therefore, it is recommended to cover the area that has been repaired with an oil-based primer that will protect it from moisture. Then, you can reapply the wood sealant, which is waterproof.

The website won't work

There are many reasons windows won't open. Wood frames can warp during humid weather, the house may have settled or someone may have closed it for security reasons. With a little patience and the right tools you can open most stuck windows.

One of the main causes of a window that won't open is accumulated debris or gunk on its moving parts. The buildup of dirt and grime on sliding tracks, hinges and locks over time, notes Acme Glass. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Spray grease on these areas will help to prevent oxidation and keep your windows functioning properly.

The pulleys used to raise or lower the window may be loosened, or break. These parts can lose tension and become obstructed when they are situated two or more floors above the surface.

If you are having difficulty opening a door, use a pry-bar to gently open the door. Put a block in the frame of the upvc window repair near me to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood and make it easier to move.

Another common problem with windows that won't open is a faulty spring that stops the window jamb from rising or lowering. You will need to consult the owner's manual for more details depending on the person who made your windows.

If you've tried cleaning the moving parts of your windows and lubricating them but they still won't open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let the windows in your home go from functional to inoperable. If your windows aren't properly shut could make your home vulnerable to water damage and burglary. Contact our team to learn more about our replacement windows and services today!