Window Repairs

Window repairs can help homeowners save money while maintaining their comfort. In the event of serious damage, such as broken glass or a shattered frame, wooden a replacement window may be required.

But there are many other issues that can be addressed to extend the lifespan of your windows. Common issues include:

Broken or cracked Panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree branch blown by strong winds, cracked window glass is not only unattractive but can lead to higher electric bills since the broken pieces allow cold air into your home. It's fairly easy to fix windows with broken panes.

Begin by carefully removing the glass using gloves and sunglasses. You may have to use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the wood of the frame using a soft cloth or paper towel.

After the area is cleaned, apply a waterproof silicone caulking around the perimeter of the frame. This helps prevent water from entering through the crack, which can cause further damage to both the frame and the glass.

A bad crack in double glazing repairs-paned glass can cause gas to leak between the panes, making your windows less insulative. If the crack is severe enough to compromise the integrity of the glass, or the glass has an inner pane that's totally missing, it might be time to contact an expert.

Cracks caused by thermal stress can happen when there's a dramatic difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If the cracks are located on two sides of a window, it is best to replace it instead of try to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready for replacement. It will also keep out bugs and cold wind. You can cut an area of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This isn't a long-term solution, but it works well in a pinch and keeps cold air and insects from entering your home. If your windows are older and you're starting to notice cracks in the glass It's an excellent idea to talk with your local window company about whether replacing the entire window might be the best option for you.

Rotten Wood

Wood rot is a common issue with windows. It can alter the appearance of a house and can also be a safety risk. It is possible to repair damaged wood. First, you need to make sure that the cause of the rot has been dealt with. Look for leaks on the roof and other areas where water could get into the wood.

The next step is to get rid of any rotten areas of the window frame. This can be done with the claw hammer, wooden chisel, or rasp. After removing the decayed wood, you'll need replace it with fresh wood. It is recommended to use pre-treated wood for this project as it will be resistant to decay. If you are unable to replace the timber that has rotted you can apply wood filler and hardener to repair the damaged area. The majority of hardware stores carry this type of product. To achieve the best results, make sure you follow the directions on the label.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant to the wood. Sikkens, for example is a fantastic product to apply.

Make use of a two-part epoxy to protect the wood from further damage. It is easy to apply and leaves a nice finish. It is essential to follow the instructions on the label. After the epoxy filler has dried, you are able to rub the wood's surface. Start with a rough sandpaper, then move to an easier grade.

The last thing you would like to do is make the area that has been damaged by expose it to more water. It is therefore recommended to cover the area that has been repaired with an oil-based primer which will shield it from moisture. Then, you can reapply waterproof wood sealant.

The W won't open

There are a variety of reasons a window won't open. The house could have settled or the wooden frames could have warped during rainy weather. Somebody may have put them in place to protect themselves. With a bit of patience and the right tools, you can open the majority of stuck windows.

Gunk or debris that has accumulated can be a major cause of the window not opening. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Spray grease on these areas will help prevent oxidation, and help keep your windows operating well.

Stuck windows could also be the result of an unintentional break or loosening of the pulleys used to lift and lower the window. The components may be weakened and obstructed if they are located two or more floors above surface.

If you are having difficulty opening a door, use a pry-bar to gently push the window open. Place a block of wood on the frame to give the pry bar more leverage. Also, be sure not to harm the window or the wood. Alternatively, try running a hair dryer along the edges of the frame for a few minutes to warm the wood and allow it to move more easily.

A broken spring could be the reason for windows that aren't able to lift or lower. You will need to consult your owner's guide for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they won’t open, then it's time to replace them. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let the windows of your home go from being functional to inoperable. If your windows aren't properly closed could leave your home vulnerable for burglary and water damages. Contact our team to learn more about our replacement windows and services today!