Choosing uPVC Replacement Window Handles

Almost all customers agree that these replacement window handles made of upvc are simple to install and feel like high-quality. It's crucial to understand that the handle you pick for your window must be suitable for the window.

The key factor is the step height that refers to the space between the nose of the handle to the base or frame. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a broad selection of replacement window handles made of upvc available for purchase. They come in many different colours and styles so there's bound to be something that fits your windows. It's easy for you to make an impulse purchase, especially when the handle is damaged. Therefore, it is best to look over a few aspects before purchasing a replacement. First, you need to know what type of upvc handles you own and what the differences are between them. The table below outlines the most popular handles to help you find the one that will fit your windows made of upvc.

Espag handles are the most common and are used on the majority of modern double glazed replacement windows-glazed windows. They are typically attached to the frame by two screws that are screwed into the frame from both sides.

They have a spindle bar at the back, which can come in a variety of sizes and uPVC Replacement Window Handles this will determine the way they operate (either left or right handed). This is why it's important to take a measurement of the handle you have to ensure you're getting the right replacement.

The arm is fixed to the frame using two bolts, much like the Espag handle. The arm is curved at a low angle to ensure that it doesn't scratch your blinds. This is a great option for those who want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge which rests on the frame of the window. This kind of handle can be found on older wooden and Upvc windows.

On casement windows tilt and turn handles can be operated by either turning the handle or pressing the top of window. This opens the window from the inside, allowing you to clean the outside without having to go out onto a ladder or step over the fence. They are also a great option for those who have limited mobility, and can improve security and access in the home.

Tips and tips and

A lot of people will need to replace their uPVC window handles at some point. If this occurs it's best to know a few tips and tips to assist in making the task go as smoothly as possible.

The first step is to determine what kind of handle you have at home. Depending on what the handle is attached to and which locking mechanism it uses, it may be necessary to replace the entire handle and lock. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to change them, as well as the handle itself.

Thankfully, the majority uPVC handles adhere to industry standards and are very alike. This makes replacing them a relatively simple task. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. Once these are removed, you can then take the handle apart.

If you've got the handle broken it is recommended to make a note of how much of the spindle protrudes from the base of the handle. This will help you to measure the length of the spindle when you are looking for an alternative handle. Simply measure the length the square peg sticks out of the bottom of handle.

This is particularly important for inline uPVC window handles since they'll always be straight and open from left or right, and they won't operate in the middle. It is a good idea if you are not sure what type of handle you have at your home, to borrow a handle to see how it functions.

You can also determine the handedness of a uPVC window by observing the way the handle turns when it is in use. Handed handles can be rotated clockwise or counter-clockwise. If you're unsure, you can always ask someone else to open the window with the handle, and figure out how it operates in that way.

Take a measurement of the spindle

The selection of the right replacement handle for your windows could be a challenge as there aren't all handles that are identical in size. It is crucial to measure the spindle accurately when installing a new handle. This will ensure that the handle fits. There are a variety of types of uPVC window handles that work in different ways, so it is vital that you know what type of handle you have as well as the type of locking system.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox within the window frame. When you turn the handle, this will turn the lock inside the gearbox and opens the window. They are used on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They have an "nose" that closes over a wedge shaped striker block. They are also relatively simple to use and can be locked with keys. These handles are a little more difficult to find replacements for as they are not as common as the espagnolette handle.

If you own a tilt-and-turn uPVC then you'll need a replacement handle with a different locking mechanism. This will be able to open the window by tilting it, but also turn it back and forth to open it fully. It is essential to select a handle with a spindle that is at least 55mm in order to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to be cautious when removing it. It is possible to open the window a little larger than usual to ensure that you get to both screws fixing it to the frame. Once you have put in your new uPVC handles and checked that they are in the proper position, you can tighten up the screws and then test to ensure the lock is working correctly.

Replace the handle with the new one.

Once you have the correct handle replacement it is easy to screw in place. This will require a screwdriver, but could be simpler with an electric one. When screwing, it is important not to over tighten the screws, as this can cause the handle to warp or crack.

Inserting the spindle is the next important step to attach the new handle. The spindle is a part that is inserted into the handle to control the locking mechanism inside the window. It is vital that it fits correctly as this will ensure that the window is able to be shut and opened securely.

There are several different types of uPVC window handles. They include:

Espagnolette Handles are handles inline which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curved design that is ideal for windows in hard-to-reach locations.

Tilt and turn handles - These are used to control the opening and closing mechanisms when tilting and upvc replacement window handles move windows.

These are the most commonly used and the majority of uPVC windows have them in the first place. In the UK they are often referred to as "Bay Windows".

It can be frustrating if your uPVC handle fails. There is no need to replace the entire uPVC window because of a broken window handle. There are a few easy steps you can take to repair or replace a damaged uPVC handle.

You can fix your broken window handle quickly by identifying the model and determining the spindle. It is important to be patient and prioritize security when working with windows or tools, but this is a relatively simple task. It can mean the difference between a safe and secure home or a window replacements that is easily opened. If you have any concerns or would like to speak to a specialist about replacing the handle on your window, call Bridgewater Glass. We have a team of highly experienced and knowledgeable professionals who are able to help with any issues you might be experiencing.