Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards will fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you may think about an alarm door that comes with an integrated window doctor near me, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need to open the window to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to move the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer is applied. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window more difficult to clean and decrease its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in a breeze. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. Sending us photos through our website can often solve the issue. We are happy to give assistance.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become disaligned as a result of wear, causing an opening where the sash meets frame. If they are beyond repair, it might be required to realign them. In addition, the interlock could also become disaligned. It is located on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert immediately.