Choosing uPVC Replacement Window Handles

The majority of customers agree that upvc replacement handles are easy-to-install and feel good. It is important to be aware that the handle you pick for your window must be suitable.

The primary factor is the step height which is the distance from the nose of the handle to the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a broad selection of replacement upvc window handles available to buy. They come in a variety of styles and colors so there is sure to be something that will fit your existing windows. It's easy for you to buy something on impulse especially when the handle is damaged. It is therefore advisable to check a few things before buying the replacement. First, you need to know what type of upvc handles you own and what the differences are between them. The table below outlines the most common handles to help you choose the one that is suitable for your upvc windows.

Most double-glazed windows today come with handles that are epag. They are typically attached to the frame by two screws that screw into the frame from both sides, above and below.

The spindle bar at the back could be of different in size, and will determine if they're left-handed or right-handed. This is why it's essential to measure the current handle to ensure you're getting the right replacement windows.

Usually fixed with two bolts similar to the Espag handle, they have a low projection from the frame which means that the handle won't poke through your blinds. This is a great choice for those who want the handle to blend with your blinds and have windows made of upvc.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge that sits on the frame of the window. This kind of handle is typically used on older Upvc windows as well as some wooden windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pressing at the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or walk across the fence. They are also an excellent alternative for those with limited mobility. They are an excellent method to improve security and accessibility within the home.

Tips and tips and

Many people will need to replace their uPVC window handles at some time. If this occurs, it's a good idea to be aware of a few tricks and tips to help the job go as smoothly as it can.

Check what type of handle is located at your residence. Depending on what the handle is connected to and the locking mechanism it is using it could be necessary to change the entire handle and lock. If the roller cams or shoot bolts (espags) are blocked or seizing up, you'll have to replace them as well as the handle.

Fortunately, the majority of uPVC handles follow industry standards and are similar. This makes replacing them an simple task. The first step is to remove the screws from the handles, usually pozi-drive screws. Once the screws are removed, you will be able to remove the handle.

It's a great idea note how much the spindle protrudes from the base of your handle when you remove it. This will enable you to measure the length of the spindle to determine a replacement handle. To do this, simply take a measurement of the square peg sticking out from the bottom of the handle and use this as a reference.

This is especially true for inline uPVC windows handles, as they are always straight and only open left or right. They will not work in the middle. If you're not sure of the kind of handle you have at home, it can be beneficial to get a handle from a neighbour's home and observe how it functions to get an idea.

You can also determine the handiness of a uPVC window by observing how the handle spins when it is used. Handles that are hand-operated will turn clockwise or counter-clockwise. If you're unsure it's possible to have someone else open the window using the handle and figure out how it functions in this manner.

Take a measurement of the spindle

It isn't easy to select the correct replacement handle for your window as there aren't all handles that have the same size. It is crucial to measure the spindle accurately when installing the new handle. This will ensure that the handle is suitable. There are numerous kinds of uPVC handles that operate in various ways. It is crucial to determine which one you have and the locking mechanism you have.

The spindle on the espag handle extends out from the handle's rear and is attached to the lock gearbox in the window frame. When you turn the handle, this will turn the lock inside the gearbox, allowing you to open the window. They are typically used on uPVC casement windows and they can be locked with keys to provide extra security.

Cockspur handles are equipped with a "nose" that closes over the striker block in a wedge shape on the frame. They are usually found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. These handles can be slightly more difficult to locate replacements for because they aren't as popular as the espagnolette handle.

If you have an open tilt and turn uPVC window then you will require a particular kind of uPVC replacement handle with an entirely different locking mechanism. This will be able to tilt the window open but also turn it back and forth to open it fully. It is essential to ensure that the handle you pick has a spindle size at least 55mm, or it won't be able to get into the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will have to be careful when you remove it. It may be necessary to open the window more than normal to reach both screws that hold it to the frame. Once you have put in your new uPVC handles and checked that they are in the proper position, replacement window handle you can tighten up the screw covers and test the lock to ensure it is working properly.

Fit the new handle

Once you have the correct replacement Window handle handle it is easy to screw in place. This will require a screwdriver, but might be easier using an electric one. When screwing, it is important not to over tighten the screws, as this can cause the handle to warp or crack.

Another important step to take when installing the new handle is to insert the spindle. The spindle is the part that runs through the handle and operates the locking mechanism of the window. It is essential that the component is properly fitted to permit the window to open and shut securely.

There are a variety of different kinds of uPVC window handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved shape that is useful for difficult-to-reach windows.

Tilt and turn handles - These are used to operate the opening mechanisms and closing mechanisms for tilt and move windows.

These are the most commonly used and the majority of uPVC windows have these in the first place. They are commonly called 'Bay Windows' in the UK.

It can be a hassle if your uPVC handle breaks. There is no need to replace the entire uPVC window due to a broken window handle. There are a few easy steps you can take to fix or replace a damaged uPVC handle.

By identifying what kind of window you have, measuring the length of the spindle, and then purchasing an appropriate handle, you can easily fix the broken window handle. It is important to be patient and prioritize security when working with windows and tools, but this is a straightforward task. It can be the difference between having a secure and secure home or an insecure, easily opened window! Bridgewater Glass is the place to go if you have questions or want to speak with an expert regarding replacing your window handle. Our team is experienced and replacement Window handle knowledgeable to help you with any problem.