Choosing uPVC Replacement Window Handles

Most customers agree that the windows handles made of upvc are easy to fit and feel like good quality. But it's important to understand that the kind of handle you choose should be appropriate for your window.

The step height is the most important aspect. This is the distance between the handle and the frame or uPVC Replacement Window Handles base. Other factors to consider are lockable mechanisms and designs.

Replacement parts

You can buy a variety of replacement handles made of upvc. They are available in a variety of colours and styles so there is sure to be something that fits your windows. It's easy to buy something on impulse, especially when the handle breaks. Therefore, it is best to look over a few aspects before buying an alternative. The first step is to know what type of handles made from upvc you have and what the differences are between them. The table below lists the most common handles to help you choose the one that will fit your upvc window.

Most double-glazed windows today come with epag handles. They are typically attached to the frame by two screws that screw in from above and below.

They come with a spindle bar on the back which can come in a variety of sizes. This will determine how they work (either left or right handed). It's important to take the measurements of the handle you need to ensure you purchase the right replacement.

Typically fixed by two bolts similar to the Espag handle but they have a lower projection from the frame, which means that the handle won't poke through your blinds. This is a great option if you want the handle to blend in with your blinds and have windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge that sits on the frame of the window. This kind handle is found on older wooden and Upvc windows.

Tilt and uPVC Replacement Window Handles turn handles are often found on casement windows and can be operated by turning the handle or pushing on the top of the window. This lets you open the window from inside and clean it from outside without having to climb a ladder or step across the fence. They are also a great option for those with limited mobility. They are a great way to improve security and accessibility within the home.

Tips and tips and

Many people will have to replace their uPVC window handles at some time. It is important to know a few tips and tricks that can make the job easier.

Check what type of handle is located at your residence. Depending on what the handle is attached to and what locking mechanism it is using it might be necessary to change the entire handle and lock. If the roller cams or shoot bolts (espags) are blocked or seizing up, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles are similar and conform to industry standards for sizes, making replacing them a easy process. First, take off the screw covers on the handles. They are typically pozidrive screws. After the screws have been removed then you'll be able to remove the handle.

When you have the handle broken it is recommended to make note of how much of the spindle is protruding from the base of the handle. This will enable you to measure the spindle length for the replacement handle. Simply measure the length the square peg sticks from the bottom of the handle.

This is particularly crucial for inline uPVC window replacement handles since they'll always be straight and open either left or right, and will not operate in the middle. It's a good idea in the event that you're not sure of the kind of handle you have in your home, to borrow a handle and check out how it functions.

You can also determine the handedness of a uPVC window by watching how the handle spins when it is used. Handles can be turned either clockwise or counter-clockwise. If you're not sure then you can always ask someone else to open the window with the handle and figure out how it operates in that way.

Measure the spindle

It can be difficult to pick the appropriate replacement handle for your window since there aren't all handles that come in the same size. The spindle controls the locking mechanism inside the window. It is essential to ensure that when installing the new handle it is measured to the length of the spindle precisely to ensure that it will fit. There are a variety of types of uPVC window handles and they operate in different ways therefore it is crucial to know the type of handle you have as well as the type of locking system you have.

The spindle of the espag handle extends out from the handle's rear and is connected to the lock gearbox in the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox to open the window. They are generally used on uPVC casement windows and they can be locked with keys to offer additional security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They are characterized by an "nose" that closes over a wedge-shaped striker block. They are also relatively simple and they can be locked using keys. It can be more difficult to replace these handles because they are not as popular as the espagnolette handles.

If you have a tilt and turn uPVC window, then you'll require a specific type of uPVC replacement handle that comes with an entirely different locking mechanism. It will be able to open the window, but also turn it around to open it fully. You must make sure that the handle you pick has a spindle length of at least 55mm or it will not be able to reach into the frame of the window.

The same procedure can be used to remove and replace the uPVC handle. But, you'll need to take care when removing it. It may be necessary to open the window more than usual to reach both screws that hold it to the frame. Once you have put in your new uPVC handles and checked that they are in the correct position and tighten the screw covers and test the lock to ensure it works properly.

Install the new handle

When you have the proper replacement handle it can be screwed in place. It will require a screwdriver and an electric one could be a lot easier. It is crucial not to overtighten the screws while screwing them in. This can cause the handle or knob to become warped.

Inserting the spindle is the second important step in installing the new handle. This is the part that runs through the handle and is responsible for operating the locking mechanism within the window. It is essential that it is fitted correctly, as this will ensure that the window can be closed and opened with confidence.

There are a variety of types of uPVC handles. There are a variety of window handles made of uPVC.

Espagnolette Handles are handles inline which can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved shape which is ideal for hard-to reach windows.

Tilt and turn handles - These are used to control the opening and closing mechanisms when tilting and turn windows. They also allow for the movement of windows.

These are the most common and the majority of uPVC windows have these in place. They are commonly called 'Bay windows' in the UK.

If your uPVC window handle is damaged, it can be extremely frustrating. But, there isn't a need to replace the entire uPVC window just because of a damaged handle. There are several simple ways to repair or replace a damaged uPVC window handle.

You can repair your broken window handle swiftly by identifying the model and measuring the spindle. When working with windows and tools, it is important to prioritize safety. But it is a easy task. It can be the difference between having a safe and secure home, or a unsecured easily opened window! Bridgewater Glass is the place to go if you're in need of help or want to speak with an expert regarding replacing your window handle. We have a group of experienced and knowledgeable professionals who can assist with any issues you might be having.