Window Repairs

Window repairs can save homeowners money and make their homes comfortable. In the event of major damage, such as broken glass or a damaged frame, window replacement may be required.

But many other issues can be addressed to extend the life of your windows. Common issues include:

Broken or cracked Panes

Whether it's an errant rock being tossed by your lawnmowers, or a tree's branch blown by strong winds, cracked windows are not just ugly, but it can also result in higher electricity bills as the broken pieces allow cold air into your home. Fortunately, it's generally easy to repair windows that have damaged panes.

Begin by carefully removing the glass with gloves and safety glasses. You may need to use a utility knife to remove any remaining putty or glazing compound around the edges of the frame. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.

After the area is cleaned then apply a waterproof silicone caulking on the frame's perimeter. This will stop water from getting into the crack, which can cause further damage to the frame and the glass.

If you have double glazed window repairs near me-paned glass, a bad crack could compromise the gas layer that lies between the panes and make your windows less efficient in insulating. If the crack is severe enough that it is threatening the structural integrity of the window or the pane inside is not there you might need to consult an expert.

Cracks caused by thermal stress can occur when there's a significant difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If this happens on two portions of a window, it's probably best to replace the glass instead of attempting to repair it.

Clear tape can be used to fill cracks in windows that aren't yet ready to be replaced. It also keeps out bugs and cold wind. You can also cut an area of nylon stocking or tarp large enough to cover the crack, and fix it with duct tape. It's not an indefinite solution, but it's a good way to keep insects and cold air away from your home. If your windows are older and you're beginning to see cracks in the glass, it's recommended to consult with your local window company about whether replacing the entire window would be the best alternative for you.

Rotten Wood

Wood rot is one of the most frequent issues with windows. It can alter the appearance of a home and can also be a safety risk. It is possible to fix the wood that has rotted. First, you need to ensure that the cause of the rot has been dealt with. This can be done by examining for roof leaks, missing gutters cracking caulking, and any other areas which allow water to penetrate the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done with a rasp, chisel or claw hammer. After the rotten areas have been cleared it is time to replace them with new wood. Pre-treated wood is recommended for this project since it is resistant to decay. If you are not able to replace the wood that has been damaged You can try using wood hardener or filler to help strengthen the damaged area. This type of product will be found in a lot of hardware stores. To achieve the best results, follow the directions on the label.

After you have repaired the damaged areas of the window sill, it's crucial to protect the area. You can do this by applying a water-resistant wood sealant. Sikkens, for example is a great one to apply.

Make use of a two-part epoxy to safeguard the wood from further damage. This product is easy-to-apply and leaves a nice finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried, you can smooth the wood's surface. It is best to begin with a rough layer of sandpaper and then move to a smoother one.

You do not want to expose the rotted part to more moisture. It is recommended, therefore, to cover the surface repaired with an oil-based prime which will shield it from water. Then, you can reapply the wood sealant, which is waterproof.

It won't open

A window that isn't opening can be caused by various factors. Wood frames can warp during rainy weather, or the house could have settled or someone could have closed it to protect themselves. But with some patience and the right tools, many windows that are stuck can be opened.

Accumulated debris or gunk can be a major reason of the window not opening. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. In addition, metal hardware is prone to get rusty when in contact with humidity or Upvc window repairs direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent corrosion and keep your upvc Window Repairs operating well.

The pulleys used to raise or lower the window may become loose, or even break. These parts can be weakened and obstructed when they are placed at least two floors above the ground.

If you have difficulty opening a door, you can use a pry-bar to gently push the window open. Put a piece of wood on the frame to give your pry bar more leverage. Also, be careful not to damage the window or wood. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood and make it easier to move.

A broken spring could be the cause of windows that don't raise or lower. You'll need to refer to the owner's manual for more information depending on who made your windows.

If you have tried cleaning the moving parts of your windows and lubricating them, but they're still not opening, it might be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let the windows in your home become functional to useless. If your windows aren't properly closed could expose your home to water damage and burglary. Contact our team for more information about our windows replacement services and products today!