Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum or timber.

It is crucial to wash and oil UPVC windows and upvc window Repair doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need source some plastic spacers to assist the new pane to fit correctly into the window frame.

If you are going attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window repairs near me. However, with time, they may be afflicted by a variety of problems including sliding. A window that is sagging can cause problems with light, draughts, and upvc window repair even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have moved your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. When it is time to uPVC repair, it is important to avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

Check that any drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double-glazed glass it is more likely the problem is related to the seal, not the frame. A Upvc window Repair specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with a breeze. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change a window hinge, but it's easier if someone else helps hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also become unbalanced due to wear, causing an opening where the sash and frame meet. They can be repaired by giving them a good clean, but if they are beyond repair it could be necessary to get them aligned or replaced. Second, the interlock can also become disaligned. This is located on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually wear out and it may be cheaper to replace them instead of fixing them. So, if you're having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.